Possibilité de financement en magasin avec Flexiti - Détails
Voir tous les produits
DEWALT
Perceuse à percussion sans fil XR 20 V Max de DEWALT, 1/2 po, sans balais, vitesse variable, outil seul (sans batterie)
N° d'article 00275943
N° de produit 000389924
N° de modèle DCD996B
Format 1/2"x20V
259
$
Chacun
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Garantie
Limitée de 3 ans
Description
Utilisez cette perceuse à percussion Dewalt pour tous vos travaux de pierre et de béton. Sa lumière DEL à 3 modes illuminera les zones de travail sombres. Avec ses 3 vitesses réversibles, cette perceuse à percussion sans-fil atteint jusqu'à 2000 tours par minute. Elle est certifiée UL et ne causera donc pas de feux ou de chocs électriques.
- Moteur sans balai à haute puissance et à haut rendement qui offre jusqu'à 57% de temps de fonctionnement en plus par rapport aux moteurs à balai
- Batteries Li-ion XR avec jauge de carburant qui offrent 33% de capacité en plus par rapport aux batteries standards
- Mandrin à cliquet robuste en métal nitrocarburé de 1/2 po avec inserts en carbure pour une meilleure prise de la mèche
- DEL à 3 modes pour fournir un éclairage dans les espaces sombres ou confinés jusqu'à 20 fois plus lumineux que le modèle précédent
- Sa lumière à DEL propose aussi une fonction d'arrêt après 20 minutes
- Fabriqué aux États-Unis
Caractéristiques
Intensité de courant
0
Compatible avec les applications
Non
Outil seul
Oui
Garantie de base sur la main-d'oeuvre (mois)
12
Garantie de base sur les pièces (mois)
12
Ampèreheures de la batterie
0.0000
Temps De Recharge De La Batterie (Min)
0
Type de pile
Lithium-ion (Li-ion)
Tension de batterie
20 volts maximum
Garantie sur la batterie
S.O.
Compatibilité Bluetooth
Non
Sans balais
Oui
Boîtier/coffret de transport inclus
Non
Chargeur inclus
Non
Type de mandrin
Sans clé
Famille de couleurs/finis
Jaune
Sans cordon
Oui
Numéro de dossier/d'homologation
TBD
Interrupteur de marche avant/arrière
Oui
Nombre maximal d'impacts par minute
38250
Taille de mandrin maximale
1/2 po
Vitesse maximale en tr/min
2000.0000
Nombre de batteries incluses
0
Nombre de réglages de l'embrayage
11
Contenu de l'emballage
Perceuse à percussion, poignée latérale
Normes de sécurité
Normes de sécurité CSA
Poignée latérale incluse
Oui
Sous-marque
S.O.
Hauteur de l'outil (cm)
25,4
Hauteur de l'outil (po)
10.0000
Hauteur de l'outil (mm)
254,0
Longueur de l'outil (cm)
22,86
Longueur de l'outil (po)
9.0000
Longueur de l'outil (mm)
228,6
Puissance de sortie de l'outil
650 UWO,
Garantie sur l'outil
Limitée de 3 ans
Poids de l'outil (kg)
1,99584
Poids de l'outil (lb)
4,4000
Largeur de l'outil (cm)
10,16
Largeur de l'outil (po)
4.0000
Largeur de l'outil (mm)
101,6
Vitesse réglable
Oui
Gâchette à vitesse variable incluse
Oui
Garantie
Limitée de 3 ans
Compatible avec le Wi-Fi
Oui
Compatible avec Android
Non
Compatible avec iOS
Non
Accessoires inclus
Non
Produits fréquemment achetés ensemble
DEWALT
Chargeur radio de chantier DEWALT, compatible Bluetooth, ports de charge auxiliaires et USB 2,1 A, 2 prises
329
$
Chacun
DEWALT
Bloc-batterie au lithium-ion compact 20 V Max de DEWALT, recharge rapide, indicateur de charge à 3 DEL, léger
Rabais de
40,99 $
79
$
Chacun
119,99 $
DEWALT
Ensemble d'accessoires magnétiques DEWALT, 100 pièces, métal, étui de protection rigide
49
,
99
Chacun
Perceuse à percussion sans fil XR 20 V Max de DEWALT, 1/2 po, sans balais, vitesse variable, outil seul (sans batterie) est évalué
de
5 de
72.
Rated 1 de
5
de
drbob56 par
broke
Stopped working after 2 yars with very few working hours.
Date de publication: 2021-11-11
Rated 5 de
5
de
Chevyman par
Good drill hole in steel just what I need.
Good drill holes in steel well but will take to long for concrete if you drill concrete get a sds or sds plus drill
Date de publication: 2021-06-20
Rated 5 de
5
de
Elpopi216 par
Nice and excellent drill. I loved
This is the best drill ever good power I recommend to a body body
Date de publication: 2021-04-30
Rated 3 de
5
de
NebraskaN par
Worked for awhile
I bought this drill in July it worked great until it didn't. I took it back to where I bought it but they said I needed my receipt to warranty the product. I feel their should be a better way to track warranty in today's day and age. I have my wife looking for that receipt but that is probably going to cost me as much as the drill. I putting yes on the recommendation because of lack of information. Dewalt should add a maybe button to this page.
Date de publication: 2020-12-08
Rated 5 de
5
de
MarkMD par
Great drill
I purchased this just a few days ago, and I have already used it several times. Very solid feel. The metal chuck is a nice feature, you can feel when the bit is firmly locked in. I have been wanting to replace all of my old 18v Dewalt tools, but I was a little leary. Not so anymore, if the rest of the line is as solid as this drill, I will definitely buy them too.
Date de publication: 2020-12-04
Rated 5 de
5
de
LESTER B par
Love it!
I bought this to install my American Flag mount my brick house. It worked like a champ. Very powerful and would highly recommend this DeWalt hammer drill.
Date de publication: 2020-09-11
Rated 4 de
5
de
Slow Joe par
Great BUT!!!!
Starting with the bad. Keep in mind i don't like this drill and I'm rating it 4 stars of 5. The missing star is because it's Achilles heel. I'll talk about that first so you don't do it. NEVER EVER EVER run the drill at high load AND run the batteries dead. You can do one or the other (it's never suggested to run lithium ion dead) but not both it'll cook your drill. There's no thermal or over-current protection. The motor takes the abuse perfectly and wasn't even hot on disassembly. But the ESC can't. How do you avoid this? If you're running high load (ie 8in SDS screws in 3rd gear), the drill handles it fine (why i rate it so highly) BUT!!! As soon as the battery goes to 1 bar, grab the battery on the charger, cool the discharged battery with a vacuum or blower (it will be too hot to start charging) for about 20sec right at the terminals, place discharged battery on charger, continue working with the fully charged battery as the used one charges. I ran this drill for days driving 5-8in SDS, extreme abuse like this, and it ran perfect. Amazingly powerful and durable. But, i lent it to a coworker to do the same. He ran the first battery dead, ran the second battery dead, and the drill was dead after the second battery. To avoid killing your drill under high load, stop using the batteries as soon as they get to one bar.
Now for the good. Avoid the Achilles heel and it's an amazing drill. The electronic "clutch" is AMAZING!!! the main reason this drill scored so high with me. I'm used to mechanical clutches from older drills that make the ratchet noise when they reach the torque spec of the torque setting. Driving regular screws, you can dial in the clutch to stop at the correct time. You will have to come back with the impact to touch up some of the screws but driving 8in SDS screws in 3rd gear then coming back with the 1/4in impact for a few that are between 1/8in-2in out vs burning up an impact or slowly throttling a corded drill, it's amazing and 3-4 times faster that corded or an impact.
Another plus is the sheer torque this puts out. I STRONG discourage anyone from using the drill bit setting in 1st gear without the side handle. The amount of torque this drill has in 1st will snap three 1/4in shaft on a nut driver. Driving #4 Phillips screws 3-5in long, i needed length and stepped ther bit holder from 5/16in to 1/4in and snapped the 1/4in shaft. And not at the skinny part of the shaft that was on the chuck. Ther actual hex 1/4in shaft. Oops.
So, learn to not run batteries below 2 bars (gets to one bar, charge it) and the drill will take as much abuse as you can throw at it. This is actually what you're supposed to do with any lithium ion/ lithium polymer batteries and Nickle Cadmium batteries. So this isn't just a Dewalt Achilles heel. But you buy such a heavy duty drill, think it can handle anything, and find this out, you'll be upset like myself. Don't make that mistake and you'll be amazed with this drill. It basically cuts the cord for drills.
Picture was to find the failure point. Motor is perfect. It was the ESC (the electronics in the white caulking behind the trigger). Definitely going to rebuild this when i can get another ESC.
Date de publication: 2020-09-03
Rated 3 de
5
de
Jim Esser par
Problem with chuck loosening when on hammer mode
Has anyone else had trouble with the chuck loosening while on hammer mode? Every time I use it it loosens and I have to keep my hand there so bit wont fly away
Date de publication: 2020-08-13