Possibilité de financement en magasin avec Flexiti - Détails
Voir tous les produits
DREMEL VELOCITY
Outil oscillant électrique Velocity, 11 pièces
N° d'article 19835922
N° de produit 000390071
N° de modèle VC60-01
Format 7AM
249
$
Chacun
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Description
L'outil oscillant Velocity(MC) de Dremel vous permet de découper rapidement un large éventail de matériaux. Cet outil électrique à deux positions est conçu pour entreprendre de plus gros travaux que ne le permettent les outils oscillants standards tels que le découpage, le rabotage, le sablage, le meulage ou l'enlèvement de coulis. L'outil, qui émet peu de poussière, est pourvu d'un moteur de 7 ampères et d'une pédale de contrôle intégrée. Son angle d'oscillation de 5 degrés permet une performance précise et polyvalente, et son mécanisme de changement rapide d'accessoires Quick-Lock convient à la majorité des marques d'accessoires. L'ensemble comprend l'outil à découper oscillant, trois lames, six feuilles à poncer et un sac de rangement.
Caractéristiques
Source d'alimentation
Électrique
Ampérage
7 A
Type
Outil à découper oscillant avec accessoires
Vitesse
Variable
Orbites par minute
10 000 - 16 000 orb./min
Voltage
120 V
Inclus
Outil à découper oscillant, lame nº VC490 pour panneau, lame nº VC494 pour tuyau et pour 2x4, lame nº MM450 pour bois et cloison sèche, 3 Feuilles à poncer nº MM70W, 3 feuilles à poncer nº MM70P, un sac de rangement
Angle de coupe
5°
Modèle
Velocity(MC)
Style
Électrique
Produits fréquemment achetés ensemble
Outil oscillant électrique Velocity, 11 pièces est évalué
de
5 de
12.
Rated 5 de
5
de
RonMacRey par
Awesome and Powerful Oscillating Tool
[This review was collected as part of a promotion.] I bought this tool about 2-years ago and it still performs as well as the day I bought it. It has lots of power to make precise cuts and polish/sand most surfaces and materials.
The tool is larger than your average oscillating tool, which makes it easier to hold steady as you unleash its 7.0 amp power.
Really glad I bought this.
Date de publication: 2021-10-18
Rated 4 de
5
de
Dave57 par
Its a beast.
[This review was collected as part of a promotion.] Took care of close to floor cuts of wood trim for my wife's tiling task and went along on a trip to my daughter's in Houston for modifying exiting fireplace wood trim.
Date de publication: 2021-01-08
Rated 5 de
5
de
rb1012 par
Great tool !
[This review was collected as part of a promotion.] I bought this 4 years ago and up till a month ago, haven't really used it much. But I've been working on a bedroom restore, drywall, joists, closet, the whole thing. I used this tool to cut out drywall, flooring, rim joist, sill plate, nails and was the greatest thing to have on hand to use. I did use other tools too, including a remel rotary tool 4300 and a dremel ultrasound US40. Great tools! Love Dremel.
Date de publication: 2020-12-30
Rated 1 de
5
de
quartz par
powerswitch broke after 7 uses
Got to a job site and the powers switch would move but not turn the device on...embarrassing to say the least. was only used to cut electrical box holes in drywall.
Date de publication: 2020-08-22
Rated 4 de
5
de
Ernie par
Awesome Tool
This thing is awesome. I am remodeling my kitchen and living room and I've used it while putting down 12mm laminate floors cutting subflooring out from under the toe kick on the cabinets, getting the flooring under the door trim for entries and pantries. Sanding around the windows. It's a great tool. I do however recommend buying the more expensive cutting blades if your doing alot of plunge cutting or trim trimming. The cheaper ones wear out super quick. The tool itself is awesome wish I would have gotten it years ago.
Date de publication: 2019-11-10
Rated 4 de
5
de
a bird par
Works great
I'm pleased with the Velocity overall. It does what I've asked of it - mainly straight small precise flush cuts and cutting off nails. I will say the tool gets hot quicker than I would expect in the conditions I'm using it, though never to the point where I couldn't get the job done. Also the tool itself is not the most ergonomic shape for ones hands while making precise cuts.
Date de publication: 2019-07-10
Rated 1 de
5
de
Jayque par
Tool won’t turn on
I bought it back in February,used it twice to cut small notches in 12mm laminate and 1/2” hardwood flooring. Next time I go to use it, it won’t turn on. Switch just moves freely. Not me first Dremel but definitely me first Dremel lemon
Date de publication: 2019-04-22
Rated 4 de
5
de
Ekummerdc par
Great tool, needs a couple minor improvements
This tool works great cutting 2x4’s fascia angles were simple with this tool.
The lever for locking in the blades flops a bit. The blade stays locked, just the lever is loose. Also the shut off switch isn’t easy to work, it’s loose. I would push the switch off, but it wouldn’t shut off.
Date de publication: 2018-09-17