Possibilité de financement en magasin avec Flexiti - Détails
Voir tous les produits
ROCKWELL
Lame de scie semi-circulaire ROCKWELL 3 1/8 po à grain au carbure
N° d'article 32515085
N° de produit 000413833
N° de modèle RW8946
Format 3 1/8"
19
,
99
Chacun
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Description
- La conception à côtés plats permet des coupes faciles dans les coins et des coupes affleurantes contre les surfaces adjacentes
- Accessoire universel s'adaptant à tous les outils
- Lame semi-circulaire de 3 1/8 po
- Utilisez cette lame de scie semi-circulaire à grain de carbure pour couper ou sculpter la maçonnerie, le coulis ou le béton poreux
Caractéristiques
Matériau de la lame
Carbure
Type
Lame
Coupe le carrelage
Non
Coupe le PVC
Non
Coupe le plastique
Non
Coupe le métal non ferreux
Non
Coupe les cloisons sèches
Non
Coupe le métal ferreux
Non
Coupe le bois
Non
Grain du papier sablé
S.O.
Utilisation
Racle-coulis
Sous-marque
Sonicrafter
Quantité par emballage
1
Lame de scie semi-circulaire ROCKWELL 3 1/8 po à grain au carbure est évalué
de
5 de
6.
Rated 5 de
5
de
Keydive68 par
Grout killer
Bought this to replace a single tile in the bedroom. Before I could get to that a bathroom floor at work with a soaked subfloor under tile and cement wonder board that had to be taken out. This blade easily ripped through the grout and cement giving me an area to get the rest of it up out.
Date de publication: 2018-03-15
Rated 2 de
5
de
Benthere98 par
Great until the carbide wears off
Bought this yesterday to remove 1/8 grout in a small shower. Worked really great for 1/2 of one shower wall. From then on, I had to rotate the blade several times as the Carbide started to wear off. By the time I finished (just one wall) all the carbide had worn off (it was also leaving black metallic marks in the grout line. I wish this had been more durable. I thought that it would have got me through two to three walls before needing replacing.
Date de publication: 2017-07-30
Rated 2 de
5
de
Dissatisfied par
Poor performance
I bought this today for a regrout job I am doing. It only lasted for 20 feet of 1/8 " groute line and was worn out.
Date de publication: 2017-02-01
Rated 5 de
5
de
Arturo par
Excellent tool
I had this tool a few weeks ago. It is very useful for tile work, etc
Date de publication: 2016-12-30
Rated 5 de
5
de
DiamondD par
Works Great!
Not cheap but worth the money. A couple of these blades turned a four or five hour grout removal job into a thirty minute cake walk. I would also recommend the carbide pointed rasp for corners and tight areas.
Date de publication: 2016-12-28
Rated 4 de
5
de
ScottP par
Works well, blades wear quickly
These blades work as described for grout removal. Blade swap is pretty easy once you figure out how it works. Required a couple hours and 2 1/2 blades to remove 1/4" grout lines for approx. 70 sq ft.
Date de publication: 2016-12-20