Possibilité de financement en magasin avec Flexiti - Détails
Voir tous les produits
F. CORRIVEAU INTERNATIONAL
En ligne uniquement
Abri-soleil Séoul de F. Coriveau International 10 x 14 pi aluminium/acier bronze, toit d’acier galvanisé et moustiquaires
N° d'article 330666498
N° de modèle B101424-FNE-POL
2 315
$
Chacun
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
La plupart des commandes seront expédiées le prochain jour ouvrable. Certaines commandes pourraient prendre jusqu’à 7 à 14 jours (lorsque le magasin n’a pas les quantités suffisantes en stock). Les délais de livraison pourraient varier en raison de facteurs indépendants de notre volonté. Vous recevrez un courriel une fois votre commande expédiée. Voir les détails.
Les cartes-cadeaux sont livrées dans les deux à cinq jours suivant la confirmation de votre commande dans les grands centres urbains et dans les sept jours ouvrables pour les régions éloignées. Les cartes-cadeaux peuvent être livrées partout au Canada, sauf au Yukon, au Nunavut, dans les Territoires du Nord-Ouest et dans le Nord du Québec. Voir tous les détails.
Vendu en ligne uniquement. Le prix total comprend la livraison sans frais additionnels. Le délai de livraison est une estimation et peut varier en raison de facteurs indépendants de la volonté de RONA. Certaines restrictions peuvent s'appliquer pour les régions éloignées. Une signature pourrait être requise. Les livraisons sont effectuées au seuil ou en bordure de trottoir uniquement, à la discrétion du transporteur.
La date de livraison la plus tôt est un estimé. La date de livraison réelle peut changer selon la disponibilité du produit, ou selon des circonstances hors de notre contrôle. La date de livraison de l'électroménager peut être sélectionnée lors du paiement. S'il n'y a pas l'option de fixer une date de livraison, notre équipe vous contactera dans les prochaines 24 heures.En savoir plus.
Les partenaires tiers de RONA s'occupent de toutes les livraisons express. Disponible que pour les items sélectionnés et en inventaire au magasin sélectionné participant. L'adresse de livraison doit être située à l'intérieur du rayon de livraison du magasin participant sélectionné. Limite de 1 475 Kg (3 250 Lb) par commande. Non disponible lors de jours fériés. Le service peut être interrompu en raison d'un fort achalandage en magasin, de conditions météorologiques défavorables ou encore toute situation qui peut affecter sa disponibilité. Voir les détails.
Notre centre d’expertise communiquera avec vous pour prendre rendez-vous pour la livraison dans un délai d’environ 24 heures. Le délai de livraison est une estimation; il pourrait varier en fonction de la disponibilité des produits, ou en raison d’autres circonstances indépendantes de notre volonté. Les prix de livraison comprennent la livraison à la porte, sauf pour les électroménagers. Le service de livraison est offert dans un rayon de 50 km autour du magasin sélectionné (75 km pour nos magasins RONA+). Des frais supplémentaires pourraient s’appliquer pour l’installation. Nous ne laisserons pas les livraisons sur un site sans surveillance – notez que des frais de livraison supplémentaires pourraient s’appliquer pour toute tentative de livraison ultérieure. Voir les détails.
Ajouter au panier
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Garantie
Un an
Ajouter au panier
Description
Profitez de votre Gazebo Séoul 10 pi x 14 pi pour les journées ensoleillées, pluvieuses ou venteuses. Le cadre durable en acier trempé par électrodéposition et aluminium et le toit en acier galvanisé sont conçus pour apporter style et utilité à votre cour arrière. La finition thermolaquée de couleur bronze marbré résiste à la corrosion et a fière allure dans chaque terrasse ou jardin. Deux rails permettent d'installer des moustiquaires en polyester (inclus), des rideaux ou des micas (vendus séparément).
- Quatre saisons
- Assemblage requis d’une durée approximative de 6 heures à 2 personnes
- Cadre en aluminium et en acier trempé par électrodéposition qui a une protection contre la rouille, vis en acier inoxydable, toit en acier galvanisé
- Système à 2 rails pour la moustiquaire et les rideaux
- Moustiquaire en mailles de polyester (incluse)
- Un poteau hivernal peut être installé pour ajouter encore plus de support à votre abri pendant la saison hivernale et une toile hivernale facilite le glissement de la neige
- Quatre trous d'ancrage à la base de chaque poteau pour fixer le gazebo plus solidement au sol; quincaillerie d’ancrage non comprise
- Il n'est pas nécessaire de ranger le toit pour l'hiver, il doit cependant toujours être déneigé
Caractéristiques
Bancs inclus
Non
Nom de la collection
Séoul
Plancher inclus
Non
Matériau du toit
Acier
Garantie
Un an
Couleur/fini du fabricant
Bonze
Type
Permanent
Matériau du cadre
Aluminium
Type de métal
Acier
Peut être peint
Non
Matière première
Acier
Couleur/fini du mobilier de patio
Havane
Bardeaux inclus
Non
Forme
Rectangle
Grille/moustiquaire incluse
Oui
Profondeur extérieure (pi)
14
Hauteur extérieure (pi)
8,8
Largeur extérieure (pi)
10
Hauteur intérieure (pi)
8,8
Longueur de la fondation (pi)
14
Largeur de la fondation (pi)
10
Pays d'origine
Chine
Hi - I would like to know the colour of this steel roof gazebo? Thanks
Is the mosquito netting the thicker PVC coated type?
how many boxes does it ship in?
Abri-soleil Séoul de F. Coriveau International 10 x 14 pi aluminium/acier bronze, toit d’acier galvanisé et moustiquaires est évalué
de
5 de
2.
Rated 4 de
5
de
Mother Mel par
Good quality
We bought this gazebo just as the snow melted and put in up a few weeks later. It was just my husband and I and it took us about 6.5 hours of steady work. Just remember not to tighten anything until they tell you as we had a few things to loosen to get into the right place. We found it to be good quality and very spacious we would definitely recommend it.
As mentioned by another reviewer the 2 boxes it comes in are very heavy and we are glad we got it delivered. It was packed well and we had no issues with damage.
My only complaint is once we went to put on the mesh curtains we were short of two hooks as luck has it on our front side of the gazebo. I contacted the manufacturer and never heard back; I gave them adequate time respond. Disappointing and such a small thing for them to take care of.
Date de publication: 2021-05-01
Rated 5 de
5
de
Nyeent par
A challenge to assemble but worth it.
10 x 14 Seoul Gazebo
So! This gazebo looks great now that it is assembled. The instructions state that 2 people can assemble this in 6 hours and it is better with 4 people. I think that 4 is too many. Only certain things can be done at any one time. Here is my experience with this process.
First, the gazebo comes in two HEAVY boxes. The boxes just showed up in my driveway and I did not even know that they had been delivered. No knock on the door, no doorbell, nothing. This is a delivery company issue but if I had been made aware, I would have asked to have the boxes dropped at the back of the driveway and not in the middle of the driveway (blocking any vehicles from leaving also!).
The main box weighs 74KG or about 160lbs. I had to open the box and transport all the components to the deck individually. The second box was not as heavy but is all sheet metal so it flexed and could not be carried so had to put it onto a wheelbarrow to move it.
All frame components have a lettered sticker on them and are enclosed in a clear plastic bag. The tools, bolts, guidebook and touch up paint come in a smaller box. There is also a bag of extra bolts. I suggest that you take your time and familiarize yourself with the guidebook before taking on this assembly.
The sheet metal roof has material between each piece to prevent scratches. Use gloves and be careful! The edges are sharp and some corners are very pointy.
The package also comes with two adjustable poles to support the longer, horizontal span when there is snow on it. Great idea!
Preparation: You will benefit from having a taller ladder, (6-10’), a bench or similar to stand on, a 20’ measuring tape and a c-clamp or c-vice grips. Gloves when handling the roof is also suggested. And patience. Lots of patience.
Assembly: I assembled this with a friend who is mechanically inclined, as am I. It helped that we were both like-minded in our methods. The booklets/instructions (English & French) are typical line diagrams and provide basic directions. The most important point is to NOT tighten the bolts until all components of a section are assembled. In fact, during assembly of the roof, we did not tighten any components until completed. The exception to this were the topmost screws of the roof panels. See Roof section.
Expanding on this concept, do not OVER tighten. Some of the threads are just cut into sheet metal and it would easy to strip these threads. The riv-nuts are more robust so you can apply more torque but be aware that the threads can be stripped relatively easily.
This gazebo was assembled on a deck so being level was not an issue. If you are doing this on ground, ensure that your posts are level. Things will just go easier. I mean, less difficult.
The very first issue came with connecting the base plates to the bottom of the posts. The instructions state to insert three bolts through three holes in the post, and into the plate. There are only two holes. I was not going to pack everything up and send it back to Lowe’s for that, so I carefully drilled a hole, put a bolt in and …..the base plate is not threaded! I am not sure if this is a quality control issue or not but this is poor design. The base plate should have all three bolts attached. Moving on.
The longer and shorter horizontal members assembled easily. We assembled the horizontal members to the posts on the ground, then stood the assembly up. The only time an extra hand would have been beneficial was during this step. Diagonal braces went on without issue. Once the four horizontal members are bolted onto the four posts, carefully measure the diagonal and adjust before tightening the braces and moving on.
For the next step, you will need a hover-board from Back to the Future. Seriously. OK, the instructions do not say how to do the roof trusses so this is what we did. The heavier K pieces were attached to the corners. (They will self support for the amount of time needed) Then my friend stood on the ladder and held the bottom roof plate in place while I stood on the bench and attached the corner members to the roof plate. The remaining L pieces all attached easily. Do NOT tighten these as adjustments will be made until the very end.
Lateral cross members are installed now. Again do not over tighten.
The top roof plate went on next. Leave this very loose. Looking back, we both agreed that this heavy component could have been left off completely until the just before the last roof panel was put on. The issues that we had with trying to wedge the roof panels between the top and bottom roof plates could all have been avoided by simply not having that plate on until much later in the process.
The hook goes into the bottom plate. I actually used the hook to pull down on the bottom plate to allow more room to install roof panels at the top.
If you made it to this stage in a few hours and are feeling confident, that is about to be shattered.
We assembled the frame in less than 2 hours. The remaining time was spent on the roof panels. Here are some points to ponder from our experience.
You may need to leave the top and bottom roof plate Very loose in order to slide panels between them. Again, consider leaving it off entirely until the end. The catch here is that you need to tighten it before putting the last few panels in place. If you do not, you will not be able to tighten it once all the panels are in place.
The manual says to install panel Y first. This is fine for the first side but as we progressed, the order was less important. In fact we put Y in last on the last side in order to be able to tighten the top cap.
The roof is where the concept of not tightening the frame bolts comes into play. As panels were slid into place, the holes would not always align. However, being that the trusses were loose, it was easy to align the holes in the roof panels with the mounting points on the frames.
NOTE! When you tighten a roof panel, it will easily deform the plate and cause a buckle to either side of where you tightened it. This works to your advantage for the triangular corner pieces but against you on the main panels. The buckling will also provide an entrance for mosquitoes. Again, do not tighten any roof panel bolts until all are in place. You need to be aware of tightening the upper row of bolts on the roof before putting all the panels in. The lower row of bolts can be tightened from the ladder.
We were frustrated at the wide gap between the corner K supports and the triangular roof panels but as the roof and frames were tightened, the gaps closed up and had a surprisingly good fit.
Once the roof panels were tightened, we tightened the trusses from under the roof. We also attached the edge/trim/drainage channels. I am not sure how these will work. The design seems to be to channel the water to the corners and drain from there.
I contacted Corriveau for 6 extra CC bolts and nuts. The instructions say to use BB bolts to attach the edge/trim. These bolts are fine for the centers of the trim but at the joints, there is an additional gusset welded onto the ends to allow the two to be bolted together. This additional thickness makes it impossible to use a BB bolt with an HH plastic washer. Remember the clamp/C-vice grip from above? We used that to squeeze the gusset together in order to BARELY get a BB nut and bolt to thread together without a washer.
Screens went up quickly with each piece being half of a short side and half of a long side and a ribbon sewn at the junction to tie the screen to the post.
In total, assembly time took 8-9 hours. The majority of time was spent adding and removing roof panels. We are both of the opinion that this process could have been a lot easier without the top plate until the end.
Actual dimension of the roof is just over the 10’ x 14’ advertised size. There have been several good rains and it does not leak. I think that the plastic washers on the roof will start to fail over time due to UV but time will tell.
There are some rubber edge gaskets that work well at the points where there is roof panel to horizontal member contact, but mosquitoes will easily get in through the ribs. I will probably plug the gaps with plugs of circular foam.
All in all, it is a nice gazebo. Deck furniture fits nicely under it and the net pulls into place smoothly and the zippers seem robust. Curtains do not come with this kit and at present, we are still not able to find the correct ones for this gazebo.
I cannot give it 5 stars due to things like the missing holes in the base-plate and other issues that were encountered.
Service from Corriveau was excellent.
If this review allows me to update it, I will let you know how it survives the winter snow.
Date de publication: 2020-06-03