Product selection from EASYHEAT

Tape - Automatic Heating Tape

Article #0356033 Item #000088474 Model #AHB160 Format 420WX60'

This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.

Hassle-Free Returns 90 days to return or exchange in original condition and packaging. Read Return Policy

Warranty 1-year limited

Description

Tape.

AHB cables keep water flowing through plastic or metal pipes at ambient temperatures down to -40°F (-40°C)
The cables come pre-assembled and ready to install right out of the box
The AHB's bright power indicator light lets you know it's working at a glance
The built-in, energy-saving thermostat automatically keeps the pipe at just the right temperature
Keep your water pipes flowing for only nickels per dayathe energy-efficient AHB cables only consume 7 watts per foot of cable
For use on plastic or metal water-filled supply pipes at least three feet in length and up to 1-1/2 inches in diameter only
The circuit supplying the AHB cable must have ground fault circuit interrupter (GFCI) protection consult an electrician if you are unsure that your circuit has GFCI protection
Be sure to follow all the installation instructions supplied with the cable and to make sure the installation complies with all national and local electrical codes
Installation supplies include: scissors, tape measure, file to remove burrs, marking pencil, eye protection, EasyHeat HCA application tape or similar electrical tape, and 1/2-inch wide fiberglass or equivalent non-flammable pipe insulation with vapor seal

Application

Plumbing

Length(cm)

1828.8

Length(ft)

60.0

Series Name

AHB

Type

Pipe heat cable

Warranty

1-year limited

Wattage

420

Wall Thickness(in)

Fits Pipe Diameter(in)

Wall Thickness(cm)

0.0

Wall Thickness(mm)

0.0

Fits Pipe Diameter(cm)

0.0

Fits Pipe Diameter(mm)

0.0

Cut to Length

Safety Listing

cUL safety listing