Product selection from
3M
Double-Coated Mounting Tape - White
Article #02095465
Item #000404055
Model #110-ESF
Format 12.7MMx1.9M
Add to Cart
Description
Whether you want to create a gallery wall or install the family chore chart, this 3M Scotch(R) double-coated mounting tape delivers a strong and permanent bond on contact in only 30 minutes, without requiring the use of a hammer or nails. A piece of 40" (101.6 cm) can hold up to 10 lb (4.5 kg), which means approximately 1 lb per 4" (0.45 kg per 10.2 cm) of tape. Perfect for use on finished or painted surfaces, metal, tile and more, this tape is intended for indoor use only. For an optimal bond, make sure your surface is smooth, clean and dry. This white tape is 75" (190.5 cm) long and 0.5" (1.27 cm) wide.
- Delivers a strong, permanent bond on contact
- Holds up to 10-lbs with 40-in (1-lb per 4-in of tape)
- Easy-to-apply design with no mess or tools
- Ideal for use on finished/painted surfaces, metal, tile and more
- Intended for indoor use only
- Ensure your surface is smooth, clean and dry for the best bond
- Made in the USA from domestic and globally-sourced materials
Product specifications
Color/Finish Family
White
Core Diameter(cm)
3.048
Core Diameter(in)
1.2
Core Diameter(mm)
30.48
Double-Sided
Yes
For Use on Concrete/Masonry
No
For Use on Drywall
Yes
For Use on Glass
No
For Use on Laminate
Yes
For Use on Metal
No
For Use on Plastic
No
For Use on Stucco
No
For Use on Tile
Yes
For Use on Wood
Yes
Heavy Duty
No
Length
6.25
Length Unit of Measurement
Feet
Manufacturer Color/Finish
White
Package Quantity
1
Reflective
No
Removable
Yes
Series Name
N/A
UV Resistant
No
Thickness
2
Thickness Unit of Measure
Millimeters
Use Location
Interior
Warranty
None
Water Resistant
No
Width(cm)
1.27
Width(in)
0.5
Width(mm)
12.7
Double-Coated Mounting Tape - White is rated
out of
5 by
6.
Rated 5 out of
5
by
RonArt from
Springy now but for how long
I'm interested in this mounting tape's spring quality, that is, its ability to return to its original thickness after being compressed. Specifically, I am building a Normally Open low-voltage switch that doesn't click. The design is 2 rigid brass 1/8" wide strips separated by single squares of this tape at each end. The bottom strip is indented in the center so that the tape only needs to be compressed to half of its original 1.9mm thickness.
My question is How well will the tape retain its ability to return to its original thickness? Only the edges will be exposed to air.
Date published: 2024-03-01
Rated 1 out of
5
by
KJS1 from
HORRIBLE product
I bought this to use for handing some things in my classroom and it was the WORST product I’ve used. The second side was impossible to get off, and the tape was ruined by the time I was able to get it. I will not be purchasing again.
Date published: 2021-08-17
Rated 3 out of
5
by
Ethan from
PERMANENT needs to be more clear
I bought this product to mount things in the apartment I rent. It held great and worked as described. I give three stars because the fact that this tape is PERMANENT is nowhere to be found on the front of the package. That needs to be crystal clear when the tape is designed to not be removable and most foam tape like this is. I should have read the fine print, I know. I sure wish I had after spending hours to get it off my walls.
Date published: 2021-08-10
Rated 4 out of
5
by
Caly28 from
Bien
Il fait l’affaire ! Il ne colle pas énormément non plus mais assez pour coller des affiches au mur
Date published: 2021-02-15
Rated 1 out of
5
by
rob710 from
Poor performance
Product did not perform as advertised. I made sure the surface was clean and dry but it would not stick..
Date published: 2019-09-09
Rated 1 out of
5
by
loriandrewsarah from
Did not hold!
Bought this to mount a magnetic knife holder and expensive knives. Used 22" to hold 2.2lbs. Mounted on white ceramic clean tiles. Held for 1 day and then came crashing down. Not impressed!
Date published: 2019-01-07