Cadet Energy Plus 4.75 x 12-in 1600 W 120/240 V Fan-Forced Heater

Use up to 30% less energy and experience more comfort with precise, consistent temperature control. The Energy Plus in-wall fan-forced electric heater uses an intelligent control and auto adjusting fan speed to maintain the desired temperature for your room within 1°. Delivering only the heat, you need for maximum efficiency. This hard-wired electric heater warms small to medium-sized rooms up to 175-ft². Before purchasing, confirm your power supply voltage to determine the heater's output (check your breaker, use a voltmeter, or refer to your old heater’s label if replacing).

• Hard-wired multi-volts fan heater with unique power supply smart sensor takes all the guesswork out of installation by auto-adjusting the heater voltage to match your voltage supply
• Multi-Volt options: 1,600 W output at 240 V (6.7 A, 5,460 BTU); 1,500 W output at 208 V (7.2 A, 5,120 BTU); 1,000 W output at 120 V (8.3 A, 3,412 BTU)
• Easily update old heaters: uses same wall can as many Cadet Com-Pak series units, so no wall patchwork or additional wall board cut outs should be required
• Choose the correct heater size for your space; simply match your area to the corresponding wattage (see chart below)
• Space-saving, recess-mount design; rough-in dimensions: 8-in W x 10.125-in H x 4-in D
• A complete unit including wall can, heater, white grille and built-in digital thermostat
• Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
• A high-temperature safety device switches heater off if normal operating temperatures are exceeded
• Tamper-proof settings let you lock in minimm and maximum temperature points and a fan-only mode lets you circulate air year round without heat